IICRC certified mold remediation built for South Louisiana — from inspection and testing through remediation and clearance verification. We fix the moisture source, remove the mold, and document the entire process so you have proof the job was done right.
Call (985) 256-9304Schedule Inspection
IICRC Certified
Licensed & Insured
24/7 Emergency Response
Who We Are
Mold Removal Houma is a locally operated mold inspection and remediation company based in Houma, Louisiana. Every technician on our crew holds current IICRC certification in mold remediation, and every job — whether it’s a single bathroom wall or an entire crawl space — follows IICRC S520 protocols from start to finish.
We are fully licensed and insured to perform mold remediation in the state of Louisiana. Our work is verified by independent third-party laboratory testing, not in-house results, so you get an unbiased clearance report you can trust and hand to your insurance adjuster without question.
When you call our emergency line, you reach the crew that does the work — not a call center, not an out-of-state dispatcher. We live and work in the same community we serve, and that local presence means faster response times and a deeper understanding of the building conditions and moisture challenges specific to this area.
Why Houma Needs Mold Specialists
Houma’s climate and construction create conditions that general contractors and national franchise operations aren’t always equipped to handle. The combination of year-round humidity, a high water table, frequent storm activity, and an older housing stock built largely on pier-and-beam foundations means mold problems here don’t follow the same playbook as drier parts of the country.
We deal with these conditions every day. Our team understands the moisture dynamics of raised homes with crawl spaces that trap ground moisture, slab foundations in newer subdivisions where humidity gets pushed into wall cavities, attics that absorb heat and condensation under metal roofing, and HVAC systems that run nine to ten months a year without a real break. We also see the long-term effects of Hurricane Ida repairs — rushed reconstruction, trapped moisture behind new drywall, and insulation that was installed wet and never dried out.
That local expertise is what separates a company that removes visible mold from one that solves the problem so it doesn’t come back.
Our Approach to Mold Remediation
We don’t just treat what’s visible — we find the moisture source driving the growth and correct it as part of the remediation. Mold is a symptom. A failed vapor barrier, poor drainage, a slow roof leak, condensation inside an HVAC system — those are the causes. If the source isn’t fixed, the mold returns regardless of how thoroughly the surfaces are cleaned.
1. Inspection and Assessment
Every project starts with a thorough on-site inspection. We use thermal imaging cameras and pin-type moisture meters to map moisture throughout the structure — not just the obvious wet spots, but hidden moisture behind walls, under flooring, and inside HVAC systems. When the situation calls for it, we collect air quality samples and surface swabs for laboratory analysis to identify the species and concentration of mold present.
We check the areas most remediation companies skip: pier-and-beam subfloors, HVAC drain pans and evaporator coils, wall cavities behind cabinetry, attic sheathing under metal roofing, and the interior of ductwork. That’s where the real contamination hides in South Louisiana homes.
2. Containment and Air Filtration
Before we touch any contaminated material, we isolate the work area with plastic sheeting containment and seal off HVAC registers to prevent cross-contamination. Commercial HEPA air scrubbers run continuously throughout the project, creating negative air pressure inside the containment zone so mold spores move toward the filter — not into clean areas of your home.
3. Remediation and Material Removal
Contaminated porous materials — drywall, insulation, carpet, ceiling tiles — are removed, bagged, and disposed of according to Louisiana DEQ guidelines. Non-porous surfaces like framing lumber, concrete, and metal are HEPA-vacuumed and treated with professional-grade antimicrobial solutions. Throughout the process, we address the underlying moisture source: repairing leaks, improving drainage, installing or replacing vapor barriers, or coordinating with your HVAC technician on system repairs.
4. Clearance Testing and Documentation
After remediation is complete and the structure has been dried to target moisture levels, we bring in independent third-party testing to verify the work. Air samples are collected and sent to an accredited laboratory for analysis. You receive a complete documentation package: lab reports, thermal imaging captures, moisture mapping data, before-and-after photographs, and a clearance certificate confirming the mold has been successfully removed.
Insurance-Ready Documentation
Filing a mold-related insurance claim in Louisiana can be complicated. Many homeowners don’t realize how much documentation the adjuster needs, or how the format of that documentation affects the outcome of the claim.
We’ve submitted hundreds of insurance-formatted reports and worked with most major carriers that underwrite in the Houma area. Every report we produce is structured the way Louisiana adjusters expect to see it: lab results tied to specific sample locations, thermal captures with timestamps, detailed moisture readings at each inspection point, photographic documentation of every stage of work, and a clearance certificate from an independent testing firm.
We also communicate directly with your adjuster when needed — explaining the scope of work, answering technical questions, and providing supplemental documentation if the carrier requests it. Our goal is to make the claims process as straightforward as possible so you can focus on getting your home back to normal.
Our Services
Mold Inspection & Testing
Comprehensive property inspection using thermal imaging, moisture meters, and laboratory air quality and surface sampling. Detailed reporting with insurance-ready documentation.
Crawl Space Mold Removal
Full remediation of contaminated crawl spaces, including joist and subfloor treatment, vapor barrier installation, and drainage correction for pier-and-beam homes.
Attic Mold Removal
Removal of mold growth on roof sheathing, rafters, and attic insulation caused by poor ventilation, roof leaks, and post-storm moisture intrusion.
Emergency Mold Removal
24/7 emergency response for active water intrusion, storm damage, and burst pipe situations where immediate containment prevents a small problem from becoming a large one.
Black Mold Removal
Safe identification, containment, and removal of Stachybotrys and other toxic mold species with full laboratory verification and clearance testing.
HVAC & Duct Mold Removal
Complete decontamination of air handlers, evaporator coils, condensate systems, and supply and return ductwork to eliminate mold at its most common distribution point.
Where We Work
We are centrally located in Houma and provide mold inspection and remediation services throughout the surrounding area, including:
For emergency calls, we deploy same-day across the Houma area. For active water intrusion, our typical on-site response time is within a few hours.
What to Expect When You Call
When you call (985) 256-9304, here’s what happens:
- You talk to us directly. No answering service, no call center. You reach the team that will be at your property.
- We ask the right questions. We’ll ask about what you’re seeing, when it started, whether there’s been recent water damage, and whether anyone in the household is experiencing symptoms. This helps us prepare the right equipment before we arrive.
- We schedule an inspection. For standard inspections, we’ll find a time that works for your schedule. For emergencies, we deploy immediately.
- We inspect before we quote. We won’t give you a price over the phone without seeing the property. Every mold situation is different, and an honest estimate requires an on-site assessment.
- We explain what we find. After the inspection, we walk you through exactly what we found, what needs to be done, what it will cost, and how long it will take — before any work begins. No surprises.
- We do the work and prove it’s done. Remediation follows IICRC S520 protocols, and independent clearance testing confirms the results. You get a complete documentation package when the job is finished.
We also offer a free initial consultation. If you schedule a paid inspection and move forward with remediation, the inspection fee is applied as a credit toward the cost of the project.
Frequently Asked Questions
Are you licensed and insured?
Yes. Mold Removal Houma is fully licensed to perform mold remediation in the state of Louisiana and carries comprehensive general liability and workers’ compensation insurance. We can provide proof of insurance upon request.
What certifications do your technicians hold?
All of our technicians hold current IICRC (Institute of Inspection, Cleaning and Restoration Certification) certifications in mold remediation. The IICRC sets the industry standard for mold remediation procedures, and we follow their S520 protocols on every project.
Do you handle the insurance paperwork?
We provide complete, insurance-formatted documentation including lab reports, moisture maps, thermal imaging captures, photo records, and clearance certificates. We also communicate directly with your adjuster when needed. While we don’t file your claim for you, we make sure you have everything the carrier requires to process it.
How long does a typical remediation take?
For a contained area like a single room, bathroom, or section of crawl space, most projects take one to three days of active remediation plus one to two days of drying and clearance testing. Larger projects involving multiple rooms, full crawl spaces, or whole-home contamination can take one to two weeks. We’ll give you a clear timeline after the initial inspection.
Do I need to leave my home during remediation?
It depends on the scope and location of the work. For small, contained projects in a single room or crawl space, most homeowners can stay in the home. For larger projects or situations involving toxic mold species in living areas, we may recommend temporary relocation during active remediation. We’ll discuss this honestly during the inspection — we won’t push you to leave if it’s not necessary, and we won’t tell you it’s safe to stay if it isn’t.
What areas do you serve?
We serve Houma and surrounding communities including Bourg, Gray, Chauvin, Montegut, and Schriever. For emergency calls, we deploy same-day with typical on-site response within a few hours.
How do I know the mold is actually gone?
We don’t rely on visual inspection alone. After remediation, independent third-party air quality testing is performed and samples are sent to an accredited laboratory. You receive a clearance certificate confirming that mold levels have been brought to acceptable standards. The testing is done by a third party — not us — so the results are unbiased.
Schedule Your Mold Inspection
If you suspect mold in your home, don’t wait for it to spread. Call us today for a professional inspection — we’ll tell you exactly what’s going on and what it takes to fix it.Call (985) 256-9304
Available 24/7 for emergencies. Free initial consultation.